Extron PoleVault Systems
Systems are unique A/V solutions that mount all the switching and audio
amplification components securely above the projector. PoleVault Systems are
all-inclusive complete A/V systems that are easy to install, use, and support,
making them ideal for single-projector K-12
Each PoleVault System includes all the projector
control, mounting hardware, switching, speakers, wall plates, and cabling needed
for a complete A/V system. Everything made, supplied, and supported from one
manufacturer: Extron, where your satisfaction is guaranteed. All that remains is
to add the video projector, projection screen, and sources.
Extron PoleVault Systems - Overview
PoleVault Systems offer:
|Complete, centralized A/V
switching and control system with stereo/mono amplifier using CAT 5 cable
from wall plates to projector.
Network ready with integrated IP LinkŪ allows in-room, as well as
campus-wide control, asset management and support over your network using
Extron's free GlobalViewerŪ web-based software
PoleVault System Components Include:
Extron MLC 104 IP Plus
||The Extron MLC 104 IP Plus
MediaLink Controller with built-in IP LinkŪ Ethernet Control is an
easy-to-use control panel for any small classroom or meeting room. It is
designed to control a wide range of smaller A/V systems and enables
Web-based remote diagnostics, asset management, and support. The MLC 104
IP Plus standardizes the control interface for all systems, making display
systems simple to use. Standardization also makes setup and maintenance
easier to support.
The flexible MLC 104 IP Plus acts as an
extended remote control panel. It is not a switcher; instead, as a
controller, it tells the display when to switch between its various
inputs. Presenters with little or no training can walk into any multimedia
classroom equipped with the MLC 104 IP Plus and operate the A/V system.
The MLC 104 IP Plus includes universal display control for a display's
power, input switching, and volume control. For one-button functionality,
the MLC 104 IP Plus features backlit buttons that can be custom-labeled
for easy identification. Because the buttons illuminate, they are helpful
for presenters in low-light environments.
The MLC 104 IP Plus is also capable of
learning IR commands for centralized control of external source devices,
such as DVD players and VCRs, when used with an optional IRCM - Infrared
Especially vital for high traffic areas,
the MLC 104 IP Plus is housed in a secure two-gang enclosure. It has the
same look and functionality regardless of where it is mounted: a lectern,
desk, wall, rack, or wall box.
The MLC 104 IP Plus is available in Black
Four Input PoleVault Switcher
|Receives RGB computer video, composite
DVD/VCR video, and stereo audio signals from PoleVault transmitters
|Integrated 26 watt rms audio amplifier
for stereo or dual mono audio
|Receives audio/video signals and
provides transmitter power over CAT 5 UTP cable
|Wireless microphone ready; line-level
port accepts a wireless microphone signal for amplifying the teacher's
|Voice level control sets the level of a
wireless microphone mixed with the audio from the A/V sources
|Remote control capabilities for volume
via RS-232 or Extron VCM 100 Series Volume and Mute Control or VCM 50
Series Volume Control
|Software-based tone and dynamics for
audio to meet the needs of the acoustic environment
|Autoswitching mode simplifies operation
by automatically switching to the active source
Four Input Twisted Pair PoleVault Switcher
with Integrated Stereo Audio Amplifier
At the heart of each PoleVault System is the is the PVS 204SA PoleVault
Switcher. With four video inputs, autoswitching capabilities, and an
integrated stereo audio amplifier, the PoleVault Switcher meets the needs
of most single projector A/V environments.
The PVS 204SA switcher accommodates up to two DVD/VCR video signals and
two high-resolution VGA computer-video signals, all with stereo audio. It
can be controlled via IR or RS-232 using the MediaLink Controller used in
The PVS 204SA also features an integrated 26 watt rms stereo audio
amplifier capable of driving up to four Extron speakers and filling the
room with full, rich sound.
The integrated audio amplifier also
features optional remote control of input selection and volume control,
plus software-based tone control, loudness, and limiting for
An auxiliary line level input is provided
to accept an external audio source, such as a wireless microphone.
SI 3C LP
Full-range ceiling speaker
||The Extron SI 3C LP is a
full-range ceiling speaker featuring a 4" (10.2 cm) Low Profile metal
back can for use in plenum ceilings.
The 3" (7.6 cm) full-range driver
features an incredibly wide frequency response of 75 Hz to 17 kHz, 16
watts continuous pink noise and 32 watts continuous program capacity, and
an extremely wide conical dispersion of 170°.
The SI 3C LP features an exclusive conical
baffle that provides a wider room coverage pattern, which is important for
rooms with low ceilings. This design reduces beaming of mid and high
frequencies directly under the speaker. Voice intelligibility is critical
for classrooms and many other applications, and the SI 3C LP provides
excellent voice clarity without compromising music reproduction.
Compact surface mount speaker
||The Extron SI 3 compact surface
mount speaker features a 3" (7.6 cm) full-range driver coupled to an
exclusive conical baffle that enhances coverage throughout the listening
area. An internal overload protection circuit prevents driver damage
due to excessive input levels.
This System INTEGRATORŪ Series speaker is
ideally suited for small to medium classrooms and conference rooms where
surface mount speakers are desired, but wall space for speaker placement
is limited. With a weather-resistant construction, the SI 3 is also at
home in outdoor environments.
Voice intelligibility is critical for
classrooms and many other applications, and the SI 3 provides excellent
voice clarity without compromising music reproduction.
The SI 3 is sold in pairs and is available
in a black or white finish, and includes a 5 year parts and labour
PVT RGB MK
VGA Video and Stereo Audio Input
||The PVT RGB MK VGA Video
and Stereo Audio Input is designed to work exclusively with the PVS 204SA
Four Input Twisted Pair Switcher as part of the PoleVaultŪ System. The
PVT RGB MK accepts VGA computer-video signals on a female 15-pin HD
connector and stereo audio on a 3.5 mm stereo mini jack. Signals are
transmitted to the switcher on two twisted pair cables that connect on
spring force wire connectors.
PVT RGB CV MK
VGA Video, Composite Video, and Stereo Audio Input
||The PVT RGB CV MK VGA
Video, Composite Video, and Stereo Audio Input is designed to work
exclusively with the PVS 204SA Four Input Twisted Pair Switcher as part of
the PoleVaultŪ System. The two input PVT RGB CV MK accepts VGA
computer-video with stereo audio and composite video with stereo audio and
transmits the signals to the switcher on one or two twisted pair cables
Many other options are available.
The Extron PoleVault Brochure in Adobe PDF Format is available to download
Further detail and information is available at: Extron