|
| |
Extron MLC 52 RS MK Projector Control
Extron MLC 52 RS MK
|
Basic MediaLink® Controller
|
|
|
MLC 52 RS MK MediaLink
Controller always provides a consistent, simple and familiar control method
from room to room.
Presenters with little or no training can
walk into any MediaLink equipped classroom and operate the A/V system with
minimal effort. No need to master an unfamiliar remote control or worry
about flat or missing batteries!
The Extron MLC 52 RS MK Basic MediaLink®
Controller is an economical control panel
for projectors and other display devices.
With IR and unidirectional RS-232 display control, the MLC 52 RS MK provides
easy input selection, power, and volume control, making classroom A/V
operations simple. Includes a white metal faceplate. |
Simple, Consistent Control in Every Room
|
| The MLC 52 RS MK
acts as an extended remote control panel, providing user-friendly control
for a display's power, volume, and input selection. Because the MLC 52 RS
MK offers a central point of control for a display device's key functions,
it eliminates the need for the display's IR remote control, making
operations much more efficient. With the MLC 52 RS MK, there are no
misplaced remotes to search for, no confusing menus to navigate, and no
dead batteries. No matter what brand of display is installed in each
presentation venue, the MLC 52 RS MK MediaLink Controller always provides
a consistent control method from room to room. Presenters with little or
no training can walk into any MediaLink equipped classroom and operate the
A/V system with minimal effort. |
Configurable Buttons for Flexible Control Options
|
| No programming
knowledge is necessary to install MLC 52 MediaLink Controllers. The four
lower buttons on the MLC 52 RS MK default to Volume Up, Volume Down,
Select PC Input, and Select Video Input. Using the intuitive setup
software provided, these buttons can be configured to send out any IR or
RS-232 command supported by the display, making it easy to customize the
controller to meet the needs of most single-display A/V systems. For
example, three of the four buttons could be configured for input
selection, with the fourth button dedicated to video mute or auto image.
Each button can store up to four separate commands, providing additional
flexibility to meet the specific control requirements for most display
devices. When a button is configured for Macro mode, all of the stored
commands associated with that button are sent with a single button press.
In Toggle mode, the button steps through a series of two, three, or four
commands, issuing a single command with each press of the button. |
Features Include:
|
- Simplify system operations and eliminate
the need for a handheld IR display remote.
- Buttons illuminate for ease of use in
low-light environments.
- Buttons can be set up to control display
power, volume, input selection, or any other IR/RS-232 command
supported by the display.
- Each button can be set to send out
multiple IR or serial commands. A button configured for Macro mode can
send several commands in sequence. A button configured for Toggle mode
will sequence between up to four different commands, sending out a
different command each time the button is pressed.
- Removable button caps make it easy to
label each button to clearly indicate its function; labels can be
quickly changed and don't require programming or engraving.
- Adjustable timer control provides
automatic shutdown to preserve energy, prevent plasma burn-in, or
extend projector lamp life.
- Advanced configuration, driver
downloads, and firmware updates can be performed via the front panel
configuration port without removing the controller. The included
Extron CFG Cable, part # 70-335-01, connects the MLC 52 RS MK to the
PC's RS-232 port.
- If the MLC 52 RS MK is installed in an
unsecured environment where easy access is not desirable, a security
lockout feature may be implemented to lock out all front panel
controls.
- The MLC 52 RS MK has dedicated ports for
communicating with virtually any projector or flat panel display via
IR and/or unidirectional RS-232 wired serial control. Display control
drivers can be downloaded from the Extron Web site and used to
configure the controller.
|
|
|
Price from
£292.00 + VAT
Installation from £80.00 +
VAT (Subject to site survey) |
|
